Current Affairs updated daily
KalviGavaniKalviGavani

Samacheer Kalvi 10th Science Chapter 6 Long Answer Questions — Nuclear Physics with Answers

Long answer questions (5 marks) from Samacheer Kalvi Class 10 Science Chapter 6 Nuclear Physics with detailed answers covering radioactivity, fission, fusion, and nuclear reactors.

Updated 25 May 20269 min read

Chapter 6 — Nuclear Physics: Long Answer Questions


1. What is radioactivity? Describe the three types of radiation emitted by radioactive substances.
Answer

Radioactivity is the spontaneous emission of radiation from the nucleus of an unstable atom (due to excess protons or neutrons) to achieve a more stable configuration. Discovered by Henri Becquerel (1896); studied extensively by Marie Curie and Pierre Curie.

The term "radioactivity" was coined by Marie Curie.


Alpha (α) Radiation

  • Nature: Helium nucleus — 2 protons + 2 neutrons (⁴₂He)
  • Charge: +2
  • Mass: 4 atomic mass units (amu)
  • Speed: ~5–7% of speed of light
  • Ionising power: Very high (highly ionising — can ionise many atoms per cm of air)
  • Penetrating power: Very low — stopped by a sheet of paper or a few centimetres of air
  • Effect on nucleus: Atomic number decreases by 2; mass number decreases by 4

Nuclear equation for alpha decay:

²²⁶₈₈Ra → ²²²₈₆Rn + ⁴₂He (alpha particle)

Beta (β) Radiation

  • Nature: High-speed electron (β⁻) emitted when a neutron converts to a proton
  • Charge: −1
  • Mass: Negligible (same as electron = 1/1840 amu)
  • Speed: Up to 90% of speed of light
  • Ionising power: Medium (~100 times less ionising than alpha)
  • Penetrating power: Medium — stopped by a few mm of aluminium
  • Effect on nucleus: Atomic number increases by 1; mass number unchanged

Nuclear equation for beta decay:

¹⁴₆C → ¹⁴₇N + ⁰₋₁e (beta particle) + antineutrino

Gamma (γ) Radiation

  • Nature: Electromagnetic radiation (high-energy photons) — similar to X-rays but higher energy
  • Charge: Zero
  • Mass: Zero
  • Speed: Speed of light (3 × 10⁸ m/s)
  • Ionising power: Very low (least ionising)
  • Penetrating power: Very high — several centimetres of lead or metres of concrete needed to stop
  • Effect on nucleus: No change in atomic number or mass number (just energy is released)
  • Usually emitted along with alpha or beta decay

Comparison Table:

PropertyAlphaBetaGamma
Nature⁴₂He nucleusElectronEM radiation
Charge+2−10
Mass (amu)4~00
PenetrationPaperAluminiumLead/concrete
IonisationHighestMediumLowest
Deflection by fieldYesYes (opposite)No

2. Explain nuclear fission. What is a chain reaction? How is it controlled in a nuclear reactor?

Nuclear Fission

Nuclear fission is the process of splitting a heavy nucleus into two approximately equal fragments (daughter nuclei) when struck by a slow (thermal) neutron, releasing a tremendous amount of energy and 2–3 neutrons.

Equation:

²³⁵₉₂U + ¹₀n → ¹⁴¹₅₆Ba + ⁹²₃₆Kr + 3 ¹₀n + Energy (~200 MeV)

Energy source: The products have slightly less mass than the original nucleus + neutron. This mass defect (Δm) is converted to energy by Einstein's equation:

E = Δm × c²

(c = 3 × 10⁸ m/s) — even a tiny mass produces enormous energy.


Chain Reaction

The 2–3 neutrons released in each fission can each cause further fission in other uranium-235 nuclei → releasing more neutrons → causing more fissions → exponential growth of reactions = chain reaction.

Types:

  • Uncontrolled chain reaction: Each fission causes more than one new fission → exponential growth → enormous energy released in a tiny fraction of a second → nuclear bomb (atomic bomb)
  • Controlled chain reaction: Exactly one neutron per fission causes the next fission → steady, controlled energy release → nuclear reactor

Nuclear Reactor

A nuclear reactor is a device that maintains a controlled, self-sustaining nuclear fission chain reaction to produce heat energy for electricity generation.

Components:

ComponentMaterialFunction
FuelEnriched uranium-235 (or Pu-239)Undergoes fission to release energy
ModeratorHeavy water (D₂O), graphite, ordinary waterSlows down fast neutrons to thermal neutrons (slow neutrons cause fission more effectively)
Control rodsBoron or cadmiumAbsorb excess neutrons to control the rate of reaction; can be inserted/withdrawn to adjust power
CoolantWater, heavy water, CO₂, liquid sodiumCarries heat from reactor core to steam generators
Pressure vesselThick steelContains the reactor core
ShieldingThick concrete + leadPrevents radiation from escaping
Working1. Neutrons cause fission in U-235 → heat + more neutrons 2. Moderator slows the fast neutrons 3. Controlled by control rods (more insertion = fewer neutrons = slower reaction) 4. Coolant removes heat 5. Heat converts water to steam 6. Steam drives a turbine → generates electricity

India's nuclear programme: India has nuclear power plants at Tarapur (Maharashtra), Rawatbhata (Rajasthan), Kalpakkam (Tamil Nadu), Narora (UP), Kakrapar (Gujarat), Kaiga (Karnataka).


3. What is nuclear fusion? Compare it with nuclear fission.

Nuclear Fusion

Nuclear fusion is the process of combining two light nuclei to form a heavier nucleus with release of enormous energy.

Example — Hydrogen fusion (in the Sun):

⁴ ¹₁H → ⁴₂He + 2 ⁰₊₁e + 2ν + energy (26.7 MeV)

Or the simpler D-T (deuterium-tritium) fusion:

²₁H + ³₁H → ⁴₂He + ¹₀n + 17.6 MeV

Conditions for fusion:

  • Extremely high temperature (~10⁷ to 10⁸ K) — to overcome electrostatic repulsion between nuclei
  • Extremely high pressure and density
  • These conditions exist in the cores of stars

Why fusion releases more energy per kilogram than fission:

  • The binding energy per nucleon increases more sharply when light nuclei fuse than when heavy nuclei split

Comparison: Fission vs Fusion

FeatureNuclear FissionNuclear Fusion
ProcessHeavy nucleus split into twoTwo light nuclei combine into one
FuelUranium-235, Plutonium-239Deuterium (²H), Tritium (³H)
Energy per kg of fuelHighVery high (several times fission)
ConditionsSlow neutrons; room temperatureExtreme temperatures (10⁷–10⁸ K)
WasteRadioactive waste (long-lived)Very little; tritium is mild
Chain reactionYesNo
Practical useNuclear reactors, atomic bombsSun and stars; hydrogen bomb
Controlled useYes (nuclear reactors)Not yet achieved sustainably on Earth

Fusion energy dream: If controlled fusion is achieved (ITER project, France), it would provide virtually unlimited, clean energy from seawater (deuterium source) — the ultimate energy solution.


4. What is half-life of a radioactive substance? Explain its significance with examples.

Half-Life (T₁/₂)

Definition: The half-life of a radioactive substance is the time required for half the radioactive atoms (nuclei) in a sample to decay.

It is a constant property of each radioactive isotope — independent of temperature, pressure, chemical form, or initial amount.

Formula
N = N₀ × (1/2)ⁿ

Where:

  • N = number of atoms remaining after n half-lives
  • N₀ = initial number of atoms
  • n = number of half-lives elapsed (n = t/T₁/₂)

Worked example: A radioactive sample has a half-life of 10 years. Starting with 800 g, how much remains after 40 years?

n = 40/10 = 4 half-lives N = 800 × (1/2)⁴ = 800 × 1/16 = 50 g


Half-Lives of Common Isotopes

IsotopeHalf-lifeUse
Carbon-14 (¹⁴C)5730 yearsRadiocarbon dating of ancient organic materials
Uranium-238 (²³⁸U)4.5 billion yearsDating of rocks and Earth's age
Radium-226 (²²⁶Ra)1600 years—
Iodine-131 (¹³¹I)8 daysThyroid cancer treatment
Cobalt-60 (⁶⁰Co)5.27 yearsCancer radiotherapy
Polonium-214 (²¹⁴Po)0.000164 seconds—

Applications of Half-life: Radiocarbon Dating

Living organisms continuously absorb carbon from the environment, maintaining a constant ratio of ¹⁴C to ¹²C. When an organism dies, it stops absorbing carbon, and the ¹⁴C decays (half-life = 5730 years) while ¹²C remains constant.

By measuring the remaining ¹⁴C/¹²C ratio in a fossil or artefact, scientists can calculate when the organism died (up to ~50,000 years).

Example: If a fossil has half the ¹⁴C ratio of a living organism, it died approximately 5730 years ago.


5. What are the harmful effects of nuclear radiation? What safety measures should be taken?

Harmful Effects of Radiation

Radiation damages living cells by ionising molecules (breaking chemical bonds), disrupting DNA, and killing or mutating cells.

Effects on the human body:

Level of exposureEffects
Low dose (over time)Increased risk of cancer; genetic mutations in future generations
Moderate doseRadiation sickness: nausea, hair loss, fatigue, anaemia, increased infection risk
High dose (acute)Severe radiation burns, organ failure, death within weeks
Extremely high doseDeath within hours to days (acute radiation syndrome)

Specific effects:

  • Genetic mutations: Radiation causes mutations in germ cells → inherited by future generations
  • Cancer: Particularly leukaemia (blood cancer), thyroid cancer, lung cancer
  • Cataracts: Radiation damages the eye lens
  • Growth retardation: In foetuses exposed during pregnancy
  • Bone marrow damage: Suppresses blood cell production → anaemia, lowered immunity

Historical examples:

  • Hiroshima and Nagasaki (1945) — atomic bombs
  • Chernobyl nuclear disaster (1986) — Ukraine
  • Fukushima nuclear disaster (2011) — Japan

Safety Measures

For radiation workers:

  • Personal dosimeters — badge worn at all times to monitor total radiation exposure
  • Lead-lined aprons and gloves — worn during procedures involving radiation
  • Distance: Stay as far as possible from radiation source (intensity decreases with square of distance)
  • Time: Minimise time of exposure
  • Shielding: Thick lead or concrete walls between worker and source
  • Regular health check-ups — blood counts, eye examinations

For general public near nuclear facilities:

  • Emergency evacuation plans
  • Distribution of iodine tablets (to protect thyroid from radioactive iodine)
  • Monitoring of food, water, and air quality

For nuclear waste disposal:

  • High-level waste stored in deep underground geological repositories
  • Encased in multiple barriers (glass, steel, concrete, clay)
  • Sites chosen for geological stability for thousands of years

📚 Samacheer Kalvi 10th Science Guide — Buy Online

Frequently Asked Questions

Alpha (α): Helium nucleus (2 protons + 2 neutrons), charge +2, mass 4 amu, least penetrating (stopped by paper), most ionising, deflected by electric/magnetic fields. Beta (β): High-speed electron, charge −1, negligible mass, medium penetrating (stopped by aluminium), medium ionising, deflected by electric/magnetic fields. Gamma (γ): Electromagnetic radiation, no charge, no mass, most penetrating (reduced by thick lead/concrete), least ionising, NOT deflected by electric/magnetic fields.